Hot Keyword:

APPLICATION & FABRIC REQUIREMENTS

Single Jersey Sample Checks: GSM, Width & Spirality

Compare garment shape, opacity, surface appearance and next-to-skin hand before defining a lightweight knit brief.

Single Jersey Sample Checks: GSM, Width & Spirality

Give every jersey swatch a traceable state

A single-jersey inspection starts with an identified knitted sample, not the garment silhouette. Label the yarn lot, construction and sample orientation. Mark the fabric face, reverse, wale direction and course direction so that a later measurement or photograph can be compared with the same part of the structure.

Single Jersey Fabric for T-shirtsSingle jersey

Keep the measurements comparable

Agree which observations concern greige fabric and which concern the finished sample. Width, mass per unit area and dimensional change need a stated preparation and finishing history. Do not combine a newly cut greige measurement with a relaxed or washed finished result and call the difference a machine setting.

Inspection recordWhat to retain
Yarn and loop surfaceRecord yarn identification and any plating arrangement; photograph both sides and mark needle lines, coverage concerns or other visible faults.
Weight and usable widthKeep the sampling position, relaxation state and measurement method with each result. State whether width refers to the supplied form or the agreed usable fabric.
Dimensional and twist reviewRetain paired before-and-after finishing samples. Record shrinkage and spirality observations using the agreed method, with direction marks still visible.

Release a reference, not an isolated number

Keep the accepted swatch, measured record and finishing description together. If a result changes, repeat the relevant comparison with an identified sample before revising the production plan. Review the available single-jersey equipment against this record and the required garment outcome.

Matching Machine Collection

Compare the configuration with your yarn, fabric structure and finishing route.

Knowledge For Your Fabric Brief

YOUR FABRIC. YOUR PRODUCTION PLAN.

Discuss Your Requirements

Share the finished product, fabric structure, yarn, target weight and width. Add your output target or factory conditions to start a configuration discussion.

Questions Before You Choose

Can a T-shirt photograph select the machine?

It explains the end use, but does not establish the knitting setup. Provide the fabric construction, yarn, greige and finished GSM, usable width and a labelled sample. Approve the offered configuration through the intended finishing route.

Are all settings in the series available together?

No. Series ranges describe alternatives. Confirm one exact cylinder, gauge, feeder count, yarn-delivery and take-up arrangement in the offer; verify the required fabric on that build rather than combining separate range limits.

What should a T-shirt buyer check before choosing a 34-inch 26G 102-feeder single-jersey setup?

Match yarn and stitch requirements to the target fabric weight and usable width. Keep the elastane plan, if used, separate. Use the trial to confirm the required face, hand and finished dimensions; a reference speed alone does not establish output.

How should GSM, usable width, shrinkage and spirality be approved for repeat T-shirt fabric orders?

Keep greige and finished samples from the same identified trial roll. State conditioning and finishing, record the agreed measurement method and acceptance limits, and retain the approved yarn and settings with the first-roll release record.

More production details (optional)

Explore Related Directions

Need Help?
Please leave your contact information to get our latest catalog
Get In Touch Now >
Kunyuan Machinery Manufacturer

Tel: +86-13859034518

Email: info@kunyuanmachine.com

MP/WhatsApp: +86-13859034518

Manufacturer Address:Bacuo Village, Yonghe Town, Jinjiang City, Fujian Province

NEW KEYWORD

About Us

Products

Information