KUNYUAN · FABRIC FIRST
Separate face, tie and loop-yarn decisions, and carry an identified knitted sample through the proposed finishing trial.
Explore the application and fabric requirements behind this solution.
APPLICATION · Sweatshirts & Fleece Fabrics
Prepare fleece trial records that distinguish face, tie and loop yarns, loopback and brushed states, finished GSM, width and surface inspection.
Explore the application ↗Fabric construction, yarn and finishing trials guide the final configuration.
APPLICATION · Sweatshirts & Fleece Fabrics
Separate sweatshirt styling, layering, inner-surface touch and finished bulk when preparing loopback or fleece garment samples for review.
Explore the application ↗Fabric construction, yarn and finishing trials guide the final configuration.
These inputs connect your finished-product idea with an equipment specification.
Identify each yarn role, composition and count; include both fabric sides.
Define loop appearance, greige weight and any brushing or raising route.
Review face distortion, reverse appearance and finished dimensions together.
Identify the desired face and loop or raised reverse.
Match face, tie and loop yarns to the offered sweatshirt setup.
Retain the unraised baseline and compare the finished sample.
Confirm face stability, finished hand, dimensions and repeat settings.
Allow room for yarn-package handling and fabric rolls. If brushing or raising is part of the route, identify where it will happen and how rolls move between processes.
Approve the knitted fabric and finished surface separately; compare face stability, loop condition and dimensions.
The published 32-inch, 22G, 96-feeder sweatshirt configuration is a starting point. Confirm the requested construction and yarn plan against the offered specification.
Brushing and raising are finishing operations. Decide the finishing route from the knitted fabric and compare controlled samples.
Compare the configuration with your yarn, fabric structure and finishing route.
Single Jersey Circular Knitting Machine
Configure a 32-Inch 22G 96-Feeder Sweatshirt Circular Knitting Machine around loopback/fleece yarns, raising route and paired greige-to-finished samples.
View machine ↗Explore the material, machining and inspection steps behind your configuration.
Review the part identity, material records and checks for the ring components.
Review the equipment used for each machining operation and the corresponding component.
Review the machining process, measurement points and inspection records for the actual core part.
Control three-thread fleece GSM by mapping ground, tie and fleece yarn roles to loop geometry, take-down, raising and the final conditioned weight result.
Read more ↗Plan a three-thread fleece brushing trial with unraised controls, identified yarn roles, face and back assessments, and a repeatable finishing decision.
Read more ↗YOUR FABRIC. YOUR PRODUCTION PLAN.
Share the finished product, fabric structure, yarn, target weight and width. Add your output target or factory conditions to start a configuration discussion.
Tel: +86-13859034518
Email: info@kunyuanmachine.com
MP/WhatsApp: +86-13859034518
Manufacturer Address:Bacuo Village, Yonghe Town, Jinjiang City, Fujian Province
